Our Roofing Work

Name: Blackpool Roofing Company
Telephone: 07441 348374

Genuine completed projects from across Blackpool and the Fylde Coast.

The newly slated roof around the chimney stack

Full slate re-roof with new roof window

Fylde Coast · September 2026

Problem: The existing slate roof was at the end of its life, with slipped, cracked and delaminating slates across the whole elevation and failing flashings around the old roof window.

Work completed: Stripped the roof back to the rafters, fitted new breathable membrane and treated battens, then re-slated the whole roof. A new roof window was installed with proper flashing kit and leadwork, and the ridge was re-bedded.

Materials: Natural slate, breathable roofing membrane, treated timber battens, lead flashings, roof window with slate flashing kit.

The old slate roof before work began, with slipped and delaminating slates around the roof windows

Stripping the old slates back to the battens

New breathable membrane and battens fitted beside the chimney

Membrane and battens in place, ready for slating

New roof window being flashed into the slate courses

Detail of new slates being fitted among the existing courses

New slates going on over the fresh membrane and battens

The finished re-roof from the scaffold, showing the new slates and gable

More about new roofs

The finished slate roof and dormer with new leadwork, chimney behind

Slate roof with dormer, lead valleys and dry ridge

Blackpool · June 2026

Problem: The roof and dormer needed a complete renewal, including the valleys and ridge, which were relying on ageing mortar.

Work completed: Re-slated the roof and dormer cheeks, formed new lead valleys and chimney flashings, and finished the ridge with a modern dry ridge system that needs no mortar maintenance.

Materials: Slate, code-grade lead for valleys and flashings, dry ridge system, breathable membrane and treated battens.

New slates around the roof window with the chimney reflashed

New lead valley and stepped flashing where the dormer meets the chimney

The new dry ridge along the top of the roof, looking across Blackpool

Close-up of the new lead valley between the slate slopes

More about new roofs

The finished fibreglass flat roof with new trims and sealed abutment

Flat roof renewal in fibreglass (GRP)

Fylde Coast · December 2025

Problem: The old flat roof covering had failed, with cracked and lifting lead at the abutment letting water sit against the brickwork.

Work completed: Stripped the failed covering, re-boarded the roof with new OSB decking, and laid a seamless fibreglass (GRP) system with new edge trims and a properly sealed abutment.

Materials: OSB decking boards, GRP fibreglass roofing system with trims and topcoat.

The old flat roof before work, with failed flashing against the brick wall

Cracked and split lead on the old flat roof edge

New decking boards down with the GRP edge trims being fitted

The new deck ready for the fibreglass layer

More about flat roofing

Tell us about your roof

Send a short description of the problem and your postcode, or give us a call. We'll arrange to look at the roof and give you a written quotation.

Request a quotation Call 07441 348374 Message us on WhatsApp